Baumfolder Gatefold Manual do Utilizador descarregar pdf (Página 6)

To set the control panel readout for proper machine size and

language, perform the following:

1. Press the main power button in the lower left-hand corner of the

gatefold control to turn power on.

2. Select channel #1 using the channel selection button.

• The message

“ 1 Falzlange L1” will appear if the readout is in Deutsche

(German) language.

• If the control is in English the readout will be

“1 Foldlength L1”. If you

need to change the language to English, follow these steps.

2. Press the enter button in the data entry keys in the lower left-hand

corner. The word

“Arbeitbreite 52” will appear.

Use the plus and minus buttons to set the width to 52cm if required.

3. Press the down arrow button located in the data panel in the lower

left-hand corner. The words

“Diagnose” will appear.

4. Press the down arrow button again and the words

“Sprache (lingua)” will appear.

5. Press the plus or minus button to select English.

6. Press the confirm button with the arrow going at an angle to secure the

setting. The words

“1 Folding Length L1” will appear if channel “1” is

selected.

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Baumfolder Gatefold Manual do Utilizador Página 6